These intumescent urethane foam blocks are installed in openings by compressing and stacking into the opening in a brick-like fashion. The intumescent block expands in high temperatures to impede fire, smoke, and gas passage.
EZ-Path Series 44NEZ Smoke & Acoustical Pathway provides exceptional leakage and acoustical performance with tested and approved cable capacities ranging from 0 up to 100% visual fill
These intumescent urethane foam blocks are installed in openings by compressing and stacking into the opening in a brick-like fashion. The intumescent block expands in high temperatures to impede fire, smoke, and gas passage.
SpecSeal ES Sealant is a latex-based gun grade elastomeric firestop sealant designed for construction joint applications. Once cured, ES Sealant forms a flexible shield against the passage of fire and smoke. In dynamic joint conditions, ES Sealant is tested to accommodate up to 25% compression/extension of the installed joint width.
WF300 Intumescent Firestop Caulk
WF300 Intumescent Firestop Caulk is a latex-based firestop caulk designed for residential wood frame construction. WF300 Caulk is tested for addressing penetrations through wood/frame construction such as wood stud walls and floor/ceiling assemblies. Under fire exposure, WF300 expands to up to four times its original volume.
SpecSeal LC Endothermic Sealant
SpecSeal LC Endothermic Sealant is a latex-based gun grade firestop sealant for construction joints and non-combustible penetrations. After application, LC Sealant cures to form a flexible seal against the propagation of fire. Under fire exposure, LC absorbs heat and release water vapor resisting the progress of smoke and flame.
SpecSeal LCI Intumescent Sealant
SpecSeal LCI Firestop Sealant is a water-based intumescent sealant intended for a wide range of through-penetration and construction joint applications. SpecSeal LCI Sealant has excellent caulking properties making it easy to apply in vertical applications as well as overhead.
SpecSeal SSS Intumescent Firestop Sealant
SpecSeal SSS Firestop Sealant is a premium grade water-based Intumescent firestop sealant. SpecSeal SSS Sealant incorporates our proprietary two-stage intumescent technology making it the go to choice for any combustible or non-combustible penetrants. As little as a 1/2" applied depth of SSS Sealant is required to provide up to a 4 Hr Fire resistance rating when tested to ASTM E814/UL 1479.
SpecSeal SIL Silicone Firestop Sealant
SpecSeal SIL300 Silicone Sealant is a high performance silicone firestop sealant tested to resist the passage of smoke, flame and water through construction joints and through-penetrations. SIL300 Sealant cures to form a flexible seal and carries a Class 1 W Rating for water resistance (Per ANSI/UL1479).
MFS Marine Firestop Sealant
This advanced hybrid polymer sealant cures in the presence of atmospheric moisture and is designed for fire-rated divisions. MFS offers better water resistance than conventional silicone sealants and forms a tight, durable elastomeric seal, preventing the transmission of air, smoke and gasses.
SpecSeal Cable Spray
SpecSeal Cable Spray applies quickly to grouped cables within cable trays, providing protection against cable jacketing ignition from direct fire exposure and slowing flame propagation. Cable Spray applies quickly with an airless spray rig, only requiring a minimum 1/8" wet applied thickness. Once cured, Cable Spray forms a flexible, water and weather resistance seal adhering to virtually all cable jacketing materials.
MCC Cable Coating
This latex-based coating cleans up easily with water and is designed to protect grouped electrical cables against the propagation of fire. MCC contains endothermic fillers that absorb heat and release water, limiting the spread of flames along cables and cable trays. The high solids coating eliminates shrinkage and adheres well to virtually all cable jacketing materials providing exceptional coverage rates.
SpecSeal Smoke 'N' Sound Acoustical Sealant
SpecSeal Smoke 'N' Sound Sealant is a high quality acrylic latex sealant designed for sealing through-penetrations (such as pipes, conduits, cabling, busways, openings), membrane penetrations (such as p-traps and outlet boxes) in smoke rated walls. SpecSeal Smoke 'N' Sound may also be used in linear applications such as wall-to-wall and head-of-wall joints where joints are designed to be either static or minimally dynamic. SpecSeal Smoke 'N' Sound Sealant is available in a single grade that has excellent caulking properties as well as high build properties on vertical or overhead surfaces. This single grade may be caulked (standard cartridge or bulk loaded), knifed or troweled. In addition, SpecSeal Smoke 'N' Sound contains no PCB's nor asbestos.
SpecSeal Smoke 'N' Sound Acoustical Spray
SpecSeal Smoke 'N' Sound spray is a high quality acrylic latex spray designed for static or minimally dynamic linear joints or gaps. SpecSeal Smoke 'N' Sound spray is formulated to adhere to all common construction surfaces and may be applied using airless spray equipment or with a brush (for small applications and touch ups).
SpecSeal AS200 Elastomeric Spray
SpecSeal AS200 Elastomeric Spray is a latex-based elastomeric firestop spray for construction joints and perimeter fire barrier applications. AS200 cures to form a durable seal that resists the passage of the products of combustion while accommodating for high dynamic joint movement
SpecSeal Fast Tack Firestop Spray
Fast Tack Firestop Spray is the ultimate in weather resistant firestop sprays. Fast Tack's hybrid copolymer formula was developed to counter the stalling effects of weather while providing unmatched washout resistance and the industry's fastest tack free times. Fast Tack outperforms and outlasts all competing firestop coatings providing the most versatile protection on the market.
SpecSeal SSP Putty & Putty Pad
SpecSeal SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion.
MPU Firestop Putty
Marine Firestop Putty is designed to seal small to medium size cable openings in fire-rated divisions. Marine Firestop Putty is a non-hardening, moldable compound that can be hand-packed into openings for permanent or temporary sealing allowing for cable removal or addition.
SpecSeal SSM Firestop Mortar
SpecSeal SSM Firestop Mortar is a light-weight cost conscious solution for oversized openings in concrete walls and floors. Once mixed with water, SpecSeal Mortar forms a light weight, low density slurry that easily applies into concrete walls and floors. SpecSeal Mortar cures quickly and will not spall or crack due to freezing or changes in temperature.
SpeedFlex TTG Track Top Gasket
SpeedFlex TTG Track Top Gasket makes short work of construction joints in gypsum board construction. TTG eliminates the need for firestop sealants or sprays by firestopping as the wall is constructed. Track Top Gasket is easily cut to length with scissors or a sharp knife, installing quick with no waste.
EZ-Path Series 22 Fire-rated Pathway
The EZ Path Series 22 Fire-Rated Pathway is a maintenance-free pathway solution for smaller cable bundles through fire-rated wall assemblies. The device is offered as a complete kit without the need for additional accessory products for installation.
EZ-Path Series 33 Fire-rated Pathway
The EZ Path Series 33 Fire-Rated Pathway is a maintenance-free pathway solution for moderate cable volumes through fire-rated walls and floors. The Series 33 incorporates built-in intumescent pads that automatically adjust to cable fills. When exposed to flame and high temperatures, the intumescent pads expand to form a dense insulative char that prevent the passage of smoke and flame.
EZ-Path Series 44+ Fire-rated Pathway
The EZ Path Series 44+ Fire-Rated Pathway is designed for high cable volume conditions through fire-rated walls and floors while eliminating the burden of ongoing maintenance. The Series 44+ incorporates self-sealing intumescent pads that automatically adjust to the installed cable fill without the need for user manipulation. Under fire exposure, the intumescent pads expand and swell resisting the passage of smoke and flame.
EZ-Firestop Grommet
EZ-Firestop Grommets make sealing penetrations of individual and small bundles of cables through gypsum board walls a snap. Molded from premium plenum-plastics and incorporating a soft foam inner core, EZ-Firestop Grommets eliminate the need for sleeves, firestop putties & sealants.
EZ-Path Series 33NEZ Smoke & Acoustical Pathway
Designed for easy installation in non-rated floor, ceilings, and walls, EZ Path Series 33NEZ Smoke & Acoustical Pathway provides exceptional cable capacity with tested and approved cable capacities ranging from 0 up to 100% visual fill. A single unit installed in a wall exceeds the cable carrying capacity of a 4" (102 mm) sleeve utilizing typical putty firestop systems (35% cable loading).
EZ-Path Series 44NEZ Smoke & Acoustical Pathway
Designed for easy installation in non-rated floors and walls, EZ Path Series 44NEZ Smoke & Acoustical Pathway provides exceptional leakage and acoustical performance with tested and approved cable capacities ranging from 0 up to 100% visual fill. A single unit has equivalent cable capacity to the Series 44+ Fire-Rated Pathway providing consistency of performance across the low-voltage pathway regardless of barrier type.
EZ-Path Retrofit Device
Non-compliant cable sleeves are the bane of every facilities team. EZ Path Retrofit Devices brings deficient openings back into code compliance quickly. The two-part clam shell design installs easily around cable sleeves to restore fire and smoke leakage performance. The EZ Path Retrofit Device retrofits cable sleeves of up to 100% visual fill, restoring fire performance without the need for additional firestop products.
EZ-Path Cable Tray Retrofit Device
The EZ Path Cable Tray Retrofit Device quickly and easily remediates existing cable trays of up to 100% visual fill restoring fire performance without the need for additional firestop products. Its two-part design installs around non-compliant cable tray penetrations, restoring fire and smoke leakage performance.
EZ Path MDM150 Fire-Rated Cable Transit
EZ Path Marine Cable Transits are the industry's only zero-maintenance transit device designed to take control of your fire-rated divisions in non-watertight applications without the need to mechanically seal openings. EZ Path Marine Cable Transits can be installed individually or ganged together to accommodate future expansions or increased cable load capacity. The heavy-duty mounting plates can be welded or even bolted to the fire-rated division for fast and convenient installs at sea or in dry dock.
EZ Path MDM400 Fire-Rated Cable Transit
EZ Path Marine Cable Transits are the industry's only zero-maintenance transit device designed to take control of your fire-rated divisions in non-watertight applications without the need to mechanically seal openings. EZ Path Marine Cable Transits can be installed individually or ganged together to accommodate future expansions or increased cable load capacity. The heavy-duty mounting plates can be welded or even bolted to the fire-rated division for fast and convenient installs at sea or in dry dock.
SpecSeal Quick Clip Factory Installation System (L-Bracket)
SpecSeal Quick Clip Factory Installation System (L-Bracket) is the fastest way to install curtain wall insulation for perimeter fire barrier systems. Simply fasten the L-shaped brackets to the mullion, cut and fit the curtain wall insulation, and then secure the insulation in place with self-locking fasteners. The brackets also allow the stiffener channel to be locked into place without additional mechanical attachment. This versatile system is great for factory-insulated curtain wall panels or recladding projects where the system will be installed from the building's exterior.
SpecSeal Quick Clip Field Installation System
SpecSeal Quick Clip Field Installation System is designed to accelerate the installation of curtain wall insulation for perimeter fire barrier systems. The system's unique U-brackets clip onto the mullions without direct attachment by screws to support the curtain wall insulation. Self-locking fasteners secure the insulation panels in place. Each U-bracket has a receiving slot to lock an "L-shaped" stiffener channel in place without the need for mechanical attachment by screws.
SpecSeal WWG Window Wall Gasket
SpecSeal Window Wall Gasket is an intumescent rubber gasket embedded with glass fiber mesh designed for edge of slab firestopping in window wall construction. Window Wall Gasket installs between the floor and aluminum framing directly behind the slab closure panel. Under fire exposure, Window Wall Gasket rapidly expands (intumesces) to form a dense, highly insulative char to seal the void against the spread of flames and hot gases.
SpecSeal Cast-in Firestop Device
Eliminate core-drilling and firestop after the concrete pour with SpecSeal CID Cast-In Firestop Devices. SpecSeal Cast-In Devices are a sleeve, concrete form and firestop rolled into a single device. SpecSeal Cast-In Devices are available in a range of sizes and heights to accommodate penetrant up to 6" Trade Size penetrants and concrete depths of up to 36".
SpecSeal Intumescent Sleeve
The SpecSeal Intumescent Sleeve is a factory manufactured device designed to protect metallic and plastic pipes penetrating through fire rated floors. Utilizing a flexible steel sleeve body and molded intumescent lining, the SpecSeal Intumescent Sleeve wraps around pipes ranging from 2 in. to 4 in. Trade size. Once installed around the penetrating pipe, the SpecSeal Intumescent sleeve slides along the pipe into the floor opening allowing for single side installation without the use of steel screws or hose clamps.
SpecSeal Closet Flange Firestop Gasket
SpecSeal Closet Flange Firestop Gaskets are one-piece, molded rubber, intumescent pads that install beneath a 3" (76 mm) or 4" (102 mm) closet flange to effectively firestop the opening. The die cut rubber gasket is perforated to delineate removable inserts sized to accommodate various outer diameters of toilet flanges. Traditional firestopping methods require the firestop material to be applied around the pipe prior to setting the toilet flange, which can be problematic if the firestop material is not recessed a sufficient distance from the top to accommodate the throat of the flange. The alternative is to apply the firestopping from the underside of the floor, necessitating the use of ladders or lifts. SpecSeal Closet Flange Firestop Gaskets solve the problem by providing a labor-friendly method of properly firestopping the opening.
SpecSeal Ready Sleeve
SpecSeal Ready Sleeve are designed for new cabling penetrations where sleeves are required. Each Ready Sleeve kit includes a preformed steel cable sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal SSP Firestop Putty. The rolled edges of each Ready Sleeve eliminate the need for bushings while the included escutcheon plates and gaskets take the place of steel strut and strap supports.
SpecSeal Ready Split Sleeve
SpecSeal Ready Split Sleeve kits easily install around existing cables. Each Ready Split Sleeve kit includes two preformed steel sleeve halves with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal SSP Firestop Putty. Ready Split Sleeve's two-piece body and plates easily capture previously installed cables while tightly fastening to the penetrated barrier.
MPACT Retrofit Sleeve
Two-piece steel shell allows for retrofit of block-and-frame transit systems where sealing blocks have been removed. The steel shell is inserted into the existing transit frame and filled with MPACT Filler Blanket and MFS Marine Firestop Sealant to restore non-compliant penetration seals.
SpecSeal Range-Taking Firestop Collar
SpecSeal RTC Firestop Collars adapt to the size combustible pipe that you are working with. One collar is designed to address standard 3 in. & 4 in. plastic pipes as well as their associated couplings. RTC Firestop Collars adaptable nature make them an excellent tool to have at hand when bringing combustible penetrations up to code.
SpecSeal LCC Intumescent Firestop Collar
SpecSeal LCC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 4 in. Trade Size. LCC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Simplify the process of firestopping combustible piping by taking the guess work out of estimation with SpecSeal LCC Firestop Collars.
SpecSeal SSC Intumescent Firestop Collar
SpecSeal SSC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 6 in. Trade Size. SSC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Under fire exposure, SSC Collars quickly expand and collapse combustible piping forming a dense char, resisting the passage of smoke and flame.
E-Wrap Endothermic Wrap
E-Wrap Endothermic Wrap is a protective wrap designed for fire protection of critical circuits and infrastructure such as fire pumps, signaling equipment, elevators, alarms, process control equipment, emergency responder communications enhancement systems (ERCES) as well as fuel oil piping. When installed around Electrical Metallic Tubing (EMT), conduits, cable trays, or pipes, E-Wrap releases chemically bound water to have a cooling effect providing up to 2 hours of protection ensuring continued operation under fire conditions.
SpecSeal EP Powershield Electrical Box Insert
SpecSeal EP Powershield Electrical Box Inserts install within steel electrical boxes directly against the back of the box. Powershield Box inserts are equally suited for remediation as well as preinstallation before the boxes have made it to the job site. Powershield Box inserts incorporate pre-scored openings allowing for easy installation around ground lugs.
MBD Marine Busbar Device
The Marine Busbar Device is designed specifically for where electrical busways penetrate fire rated steel decks or bulkheads. It is a flexible device that is comprised of split steel attachment plates, a flexible boot, compressible foam and intumescent wraps. The device adjusts to various features on the surface of the busbar while maintaining a functional smoke and air seal.
SpecSeal Composite Sheet
SpecSeal Composite Sheet is the ideal solution for large openings where a permanent seal is required. Composite sheet consists of a thin sheet steel with intumescent embedded onto a single side. Composite sheet partners with other SpecSeal firestop products such as Firestop Collars and EZ Path Devices to size down oversized openings.
SpecSeal FP Intumescent Firestop Plug
SpecSeal FP Intumescent Firestop Plugs are easy to install, creating a robust seal against fire and smoke. Firestop Plugs make an excellent solution for temporary installation overnight as well as permanent long-term seals for blank openings and cable penetrations. Sized to fit 2" and 4" diam. openings, firestop plugs make sealing conduit stubs and sleeves a breeze.
SpecSeal SSB Intumescent Firestop Pillows
SpecSeal SSB Firestop Pillows easily compress and conform around any penetrant. Equally suited for new or existing conditions, SpecSeal Pillows make short work of even the most complex through-penetration firestop conditions.
MFP Marine Firestop Pillows
MFP Marine Firestop Pillows are the ideal solution for providing a temporary seal of penetrations though bulkheads and decks while a vessel is under construction or dry docked for refit and repairs. Easily compressing and conforming around service penetrants, MFP Pillows activate in the event of a fire forming a robust seal against the passage of flame and smoke between compartments. Protecting the vessel, craftsmen, and crew alike when they are most vulnerable.
SpeedFlex Joint Profile
SpeedFlex Joint Profile combines with SpecSeal spray-applied coatings to provide unsurpassed joint movement capabilities in gypsum board construction. SpeedFlex Joint Profile replaces traditional mineral wool forming material in Head-of-Wall joints, allowing for high rate of application and increased productivity
MPACT Marine Pipe and Cable Transit
The fastest & most flexible fire and watertight sealing system for fire-rated bulkheads and decks. MPACT represents the fastest solution for sealing fire-rated cable and pipe penetrations in both watertight and non-watertight divisions. It combines pliable non-combustible filler blanket with advanced watertight MFS sealant.
FyreFlange HVAC Firestop Angle
FyreFlange Firestop Angle is a single step solution to addressing HVAC Ductwork penetrations. FyreFlange consists of a heavy steel angle with an intumescent gasket, sealing against fire and smoke while reinforcing ductwork under exposure. Eliminate the headaches of staging and multiple inspections of traditional HVAC firestopping with FyreFlange.
SpecSeal SSW BLU/BLU2 Intumescent Wrap Strip
SpecSeal SSW Wrap Strips are available in a variety of sizes and types to tackle any combustible penetration. SSW Wrap Strips are available in 12 ft. rolls as well as individually pre-sized strips to minimize waste and speed up installation. When installed in conjunction with restraining steel, SSW Wrap Strips are able to collapse non-metallic piping of up to 12 in. diameter!
SpecSeal SSW RED/RED2 intumescent Wrap Strip
SpecSeal SSW Wrap Strips are available in a variety of sizes and types to tackle any combustible penetration. SSW Wrap Strips are available in 12 ft. rolls as well as individually pre-sized strips to minimize waste and speed up installation. When installed in conjunction with restraining steel, SSW Wrap Strips are able to collapse non-metallic piping of up to 12 in. diameter!
SpecSeal SSW Intumescent Wrap Strip
SpecSeal SSW Wrap Strips are available in a variety of sizes and types to tackle any combustible penetration. SSW Wrap Strips are available in 12 ft. rolls as well as individually pre-sized strips to minimize waste and speed up installation. When installed in conjunction with restraining steel, SSW Wrap Strips are able to collapse non-metallic piping of up to 12 in. diameter!
SpecSeal 1000EX Wrap Strips
SpecSeal 1000EX Wrap Strips are highly flexible, elastomeric strips designed to firestop combustible penetrations in fire-rated floors, floor/ceilings, and walls.
SpecSeal SIL Self-leveling Silicone Firestop Sealant
SpecSeal SIL300 SL Silicone Sealant is a high performance silicone firestop sealant tested to resist the passage of smoke, flame and water through construction joints and through-penetrations. SIL300 Sealant cures to form a flexible seal and carries a Class 1 W Rating for water resistance (Per ANSI/UL1479).
Marine Snap-Seal Cable Plugs
Snap-Seal features a split design for easy installation around new or previously installed penetrants, and was specifically designed for small cables and metallic/plastic tubes. This device is ideally suited for use with surveillance cameras, speakers, lights, data cables and hydraulic lines penetrating steel and aluminum divisions.
Marine Wrap Strip
This intumescent wrap strip comes in convenient cut-to-length rolls providing an economical solution for firestopping combustible penetrants. MWS offers a flexible, high-performance option to seal bulkheads and decks by forming an effective barrier against fire, smoke, and hot gasses.
Marine RTV Firestop Foam
This two-component RTV silicone foam features excellent crack-and-void filling capabilities and provides high resilience to accommodate vibration. MRF is designed as a seal for both deck and bulkhead pipe penetrations, which when properly mixed, expands 2 to 4 times its original volume, filling available spaces and forming an effective barrier against fire, smoke, hot gas and water penetration.
SpecSeal Firestop Block
SpecSeal® Firestop Blocks are penetration firestop products resembling foam bricks. These intumescent urethane foam blocks are installed in openings by compressing and stacking into the opening in a brick-like fashion. The
intumescent block expands in high temperatures to impede fire, smoke, and gas passage.
Special Features
Safe, no solvents, no asbestos, No PCBs, no inorganic fibers
Thixotropic for high-build application
Non-halogenated
Water-based for easy installation & cleanup
Installer friendly, easily applies with standard caulking gun
Suitable for combustible and non-combustible penetrants
Tested for up to 3 Hours of fire exposure when tested to ASTM E814/UL1479
Installer Friendly, easily applied with standard caulking gun
Can be troweled on for larger applications
Tested for up to 4 Hours of fire resistance when tested to ASTM E1966/UL2079, ASTM E814/UL1479, and CAN/ULC-S115
Listed in over 80 UL Tested Firestop Systems!
Gun Grade material available in caulk tubes, sausages and pails
Tested for use in through-penetration and construction joint configurations
Compatible with CPVC Piping
Can be sanded and painted to match its surroundings
Used in over 500 UL Tested Systems
Patented Two-Stage Intumescent Technology
Easily works into tight spaces between penetrants
Compatible with CPVC Piping
Can be sanded and painted to match its surroundings
Used in over 500 through-penetration UL Tested Systems!
Ozone and UV Resistant
Excellent recovery from joint extension and compression
Listed in over 175 UL Tested Systems!
Maintenance-free and simple to install
Forms flexible, vibration-resistant seals
Resistant to aging and weathering
Non-corrosive, non-conductive
High solids, better coverage
Thixotropic for high-build application
Safe, no solvents, no asbestos, no PCB’s, no inorganic fibers
Non-halogenated
Low abrasion for longer pump life and less maintenance
Meets LEEDTM v3 requirements. Low emitting materials credit. See general LEED letter for additional applicable credits
Sand-able and paintable (when dry)
Safe - low VOCs, no solvents, nonhalogenated
Excellent sealing properties along with high build capabilities
Economical - high performance without the high price
Water resistant - will not re-emulsify when dry
Water-based - easy installation, cleanup, and disposal
Remains flexible - allows movement
Acoustically tested, reduces noise transmission
Economical - high performance without the high price
Water resistant - will not re-emulsify when dry
Water-based - easy installation, cleanup, and disposal
Thixotropic - offers high build application
Acoustically tested - reduces noise transmission
Water-based for easy installation and cleanup
Non-halogenated
Thixotropic for high-build application
Auto bonding
Safe, no solvents, no asbestos, no PCBs, no inorganic fibers
Low abrasion for longer pump life and less maintenance
Skins over quickly to resist water
Tack free in 35 minutes
Cures below freezing
Tough, water-resistant flexible shieldagainst fire and smoke.
